Replacement Double Glazing Window Handles
If a double-glazed window handle breaks it is crucial to replace it, ensuring safety and functionality.
uPVC handles are controlled by a spindle that is inserted through the middle of the handle to the lock mechanism in the window frame.
The step height of a uPVC handle can be identified by looking at the screw cover caps located on the inside of the handle.
Tilt & Turn
Tilt and turn windows are a popular option in Europe but they've only recently made an impact here in the UK. These windows are a popular option for renovations and new builds because of their sophisticated capabilities. They are simple to open and close allowing the air to flow and light into your home.
They also provide greater airtightness compared to other window types due to the locking points on the sash as well as the rubber seal running around the whole perimeter of the frame. Unlike uPVC casement windows, tilt and turn windows are opened from both the top and bottom and this allows you to clean the exterior of the windows without having to leave your home.
If you are replacing the tilt and turn window handle, it is important to consider the step height of the handle. This is the distance from the base of the handle up to where it is attached to the window frame. It is essential to do this correctly as otherwise your window will not be able to open correctly.
Standard step heights for UPVC and aluminium tilt-and-turn windows are 21mm. To ensure that your new handle fits the window, ensure it is of the same step height.
Another thing to keep in mind when choosing a tilt and turn replacement window handle is the kind of operation it has. Some handles feature a lever which is locked down, up at 90 degrees to tilt, and straight up to open. This is known as a "tilt before turn" (TBT) safe handle and you should always use this when children are about in your home.
A spindle is usually located on the handle of many tilt and turn windows. The spindle is adjusted in various locations, similar to a door lock. The length of the spindle can vary too. Some have a longer spindle and it can be adjusted using an screwdriver to move the shaft upwards or downwards. Some have a shorter spindle which may only be adjustable by loosing an incredibly small screw inside the handle base.
Casement
Casement windows are extremely popular for a variety reasons. Its simple design makes it simple to put up and also provides great energy efficiency and noise reduction. However, there are typical issues with these windows that homeowners must be aware of. If the handle on your casement breaks, you may find it difficult to open the windows.
There are easy steps you can take to change your window handle and get it back to working. Follow these steps no matter if your casement window was installed recently or is old.
It is essential to fix your uPVC window as soon as you can. This will help keep your home safe and discourage burglars. There are a few different alternatives to replace your window handle, such as espag handles and cockspur handles. It is important to select the appropriate handle for your window. If you have difficulty opening your window it may be due to the spindle inside the handle has worn out.
When it comes to replacing your uPVC casement window handles there are a few points to keep in mind. Included in this are the size of the handle along with the screw centres and spindle sizes. Also, you should consider the lock type and colour. The kind of handle you select will determine the locking mechanism for your window.
Espag handles are commonly used on uPVC window frames in the present. These handles control the espagnolette multipoint locks that are installed on your uPVC windows. They are available in different colours and are available in unlocking or locking versions. They are available in left and right opening options.
Cockspur handles are still present on older uPVC windows, however they are no longer used in the new double-glazed windows. They differ from the aluminium equivalent in that they have different heights for the steps. The version made of aluminium has a step height of 9mm in comparison to the standard 21mm handle is utilized.
Repair My Windows And Doors could also use blade or spade handles as replacement handles for double-glazed windows. These handles are like cockspur handles but they have a shorter spindle. They are usually found on older wooden frame double-glazed windows, but they can be seen on uPVC cottage windows.
Sash
If you have an old sash window, you may need to replace the handles. This is because windows of this kind typically feature a system that includes the counterweight, sash cord, pulley, and rails that allow the sash to move up and down with ease. The sash's movement blocks moisture from entering the frame, which can cause wood rot and mould. It also allows you to open the windows to let fresh air in.
To ensure that you get the right handle for your sash window, you'll need to know the size of your window's spindle. You can find this by measuring the distance between the handle base and the frame. You will also need to consider the window's hand, i.e. The handle can open either clockwise or counter-clockwise, depending on whether it's left-handed or right-handed.
Once you've selected the best sash handles to fit your window, you'll need to determine if you'll need a tilt latch. A tilt latch helps to keep the window in a upright position, and is fitted to single or double glazed windows. They are available in three varieties: internal tilt latches, tilt latches with slide-ins and tilt latches that are mounted on the surface.
For additional security, you could install a sash lock to the sash window. This will stop intruders from opening your window.
There are many different designs of sash handles that you can pick from and Espag handles being the most commonly used for uPVC windows. These are typically slim and round, and come with a locking system. There are also monkey tail and cockspur handles. These are more suitable for traditional windows and have more of a decorative appearance. However they can also be used on casement windows.
Vertical Sliding
Vertical sliding windows are the ideal choice for smaller spaces. While horizontal sliding window are popular for large openings, they are also a good option for larger openings. These windows are easy-to-clean and offer excellent ventilation. They are also more cost-effective because they don't need any maintenance. They can be damaged in the event that you accidentally move the windows. This is why it is crucial to place these windows in an area that is out of reach of pets and children.
Vertical sliding windows can be opened by a movement of left or right within the same frame. They are typically operated by a spiral balance, which is made up of a steel strip that protrudes from one side of the window, and is then twisted into coils. When the window is lowered the spiral's hidden end rotates so that the sash can be raised or closed.
The most commonly used type of vertical sliding window is made of real timber, which gives your home a classic look. If you prefer an elegant design, there are plenty of PVC-U options that come in a wide variety of finishes and colours to suit your style. Some manufacturers offer a woodgrain look for a more authentic appearance.
Vertical sliding windows are easier to open than double-hung windows in certain circumstances. They are also less vulnerable to water damage than their wooden counterparts, making them an excellent option for homes with young children or elderly.
Some homeowners include security features to their new sliding windows, which help keep unwanted guests out of the home. The simplest way to accomplish this is to wedge the lower sash with a piece of wood. Then, you can affix the scrap wood to the frame in order to prevent it being fully opened. Consider adding a sliding bolt keyed lock to the frame if prefer a more sophisticated solution. This will provide your family with peace of mind knowing their windows are safe and can be easily accessed in an emergency.